back hoe for BX 200
wayne rankin
Join Date: Posts: 1 |
2001-07-03 29800
Has anyone had occasion to buy a backhoe attachment for their Kubota BX 2200? If so, what are the choices you looked at and what did you get and how is it working?
Reply to | Quote Reply | Add Photo
back hoe for BX 200
TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley |
2001-07-05 29825
Sorry nobody responded specifically about the BX. In general, there is a lot of discussion in the archives about the risks of using a backhoe on smaller tractors as well as issues related to sub-frame vs. 3ph mounts. It would be good to read the old discussions. It also would be good to get recommendations from a dealer. I believe there are some warranty issues on some Bota models. A general conclusion from reading the archives is that sub-frame mounts are less stressful on the tractor than 3ph mounts, and the issue becomes more important for small tractors that have aluminum cases. However, sub-frame mounts tend to compromise the use of other implements. Sub-frame mounts also are fairly specific to a tractor. The real question is, if Kubota doesn't manufacture a sub-frame hoe for the BX, do any after-market manufacturers make one that fits the BX. A 3ph type probably should be avoided (although I have one) for my Ford 1710, but a question for the BX is whether some after-market 3ph hoes would mount on the narrow BX hitch. ....
Reply to | Quote Reply | Add Photo
back hoe for BX 200
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2001-07-07 29865
I have not seen anything on a backhoe for the BX series yet. As much as Tom worries about the frame width and the differential housings I don't think that there is to much to worry about unless you see a 9' hoe being offered, which I believe what we will see is a 6' or less with out full frame connections as many people have stated previusly that there is not a lot of room under these tractors. ....
Reply to | Quote Reply | Add Photo
back hoe for BX 200
Bo McCarty THE BO-MA
Join Date: Posts: 1 |
2001-07-07 29874
One of the main reasons I picked the B7500 over the BX 2200 was Kubota has a backhoe for the B series and not the BX. I haven't bought a backhoe but I have it on my wish list for next year. ....
Reply to | Quote Reply | Add Photo
back hoe for BX 200
Jim
Join Date: Posts: 1 |
2001-07-08 29880
As a Kubota dealer, We are recomending you don't put a hoe on the BX. at this time Kubota has not given the ok to any backhoe mounting. A hoe mounted could create a warranty issue down the road. ....
Reply to | Quote Reply | Add Photo
back hoe for BX 200
wayne rankin
Join Date: Posts: 1 |
2001-07-08 29889
thanks to everyone who took the time to reply - we'll pay someone to come by with a back hoe and get the bells and whistles made for the BX 2200 instead! thanks you all. Wayne ....
Reply to | Quote Reply | Add Photo
back hoe for BX 200
dchandl
Join Date: Posts: 1 |
2002-01-04 34266
I talked to my local Kubota dealer a couple of months ago and they told me that ( I think this year) Kubota was coming out with a BX22 that will accept a back hoe. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This